iPhone X first disassembled in China, dual batteries/mainboard reduced by half

For a long time, the disassembly of new iPhones has always been preempted by foreign companies, especially the famous iFixit. But now domestic players are getting faster and faster, and the iPhone 7/8 series are at the forefront. The same is true for the iPhone X, which was officially released on November 3. A video of the iPhone X disassembly from China has appeared online.

[[208523]]

Aiwanke also obtained several higher-resolution pictures and conducted a detailed analysis, discovering many interesting things. We have to admit that the internal design of iPhone X is extremely exquisite.

It can be seen that the overall layout of internal components is very similar to the previous generations of iPhone, but there are also obvious changes, especially the battery is equipped with two (total capacity 2716mAh), which is also a strive for battery life, and it should also be to match the OLED screen.

At the same time, the PCB motherboard area is much smaller, almost half of that of the iPhone 8 Plus, leaving more space for other components. However, it is also because of this that the battery is made into an L shape.

The integration of the reduced motherboard is very high, and you can see densely packed capacitors and other components and interfaces, but I don’t know how the heat is controlled, and the difficulty of disassembly and repair will inevitably increase.

In addition, there is a large amount of foam double-sided tape around the frame, and the amount of glue is significantly higher than that of the iPhone 8 Plus, so the airtightness and waterproofness should be higher; the sensor in the bangs area is indeed very complex, the structure is extremely compact, and the space utilization rate is extremely high.

For more detailed disassembly and analysis, let’s wait for iFixit to release it…